Build weights are provided for a medium‑sized frame and are intended solely as general guidance. Actual weight will vary based on the selected components and accessories, as well as standard manufacturing tolerances. These figures do not constitute a guarantee or warranty of final product weight, and we may occasionally make minor modifications to specifications without prior notice.

• The Reynolds 725 Steel frame weighs 2.1 kg, and the fully monocoque carbon forks weigh 470 g

The frame is handcrafted from Reynolds 725 triple-butted steel and features seamless welds, offering the premium looks and unmatched strength of the finest steel framesets. The tubing is produced in Birmingham, England, as it has been for well over a century.

We offer a lifetime warranty on all Ribble frames and forks for the original purchaser. This covers any manufacturing defects in materials or workmanship so you can ride with complete confidence. The standard manufacturer's warranty covers all other components.

Yes. All cables, apart from the rear hydraulic brake hose, will be routed internally if a double groupset is fitted. However, if a 1x groupset is used, every cable will be routed internally.

No, the Endurance 725 doesn't have rack mounts. Our ALLROAD range offers an excellent alternative for riders who want to carry luggage while retaining a pure road bike's pulse-racing speed and mile-eating efficiency.

There is ample clearance for 32 mm tyres (depending on the manufacturer and tread profile), which is reduced to 25 mm if mudguards are fitted.

No. Ribble bikes are supplied with inner tubes installed as standard, even when fitted with tubeless-ready wheels and tyres.

If you'd like to run a tubeless setup, the conversion must be carried out after delivery. This typically requires tubeless valves, sealant and, in some cases, tubeless rim tape depending on the wheel specification. We recommend following the wheel and tyre manufacturer's instructions when converting to tubeless.

This approach gives riders the flexibility to choose the setup that best suits their riding preferences and maintenance requirements.

Yes. Discreet mounts let you fit full-length mudguards with 25mm tyres, and in some cases, up to 28mm, depending on the brand and tread profile.

Two, with one situated on the seat tube and one on the down tube.

The bottom bracket shell is a traditional BSA threaded 68mm type.

The seatpost is 27.2 mm, and the seat collar is 30.0 mm.

The Endurance 725 does not require a separate derailleur hanger. Instead, the hanger is integrated into the frame dropout, which means there’s no removable part to replace. If it ever gets knocked out of line, it can be realigned by a mechanic, making it a robust, low-fuss solution for everyday riding and long-term durability.

• Front: M12 x 1.5 mm x 120/122 mm
• Rear: M12 x 1.5mm x 172 mm

We recommend a maximum system weight of 120 kg (bike, rider & luggage).

We do not supply pedals with our bikes due to the various systems people use. However, when configuring your bike, you can select from a range of our best-selling pedals.